Tile Restore

Acidic Tile & Grout Restorative Cleaner

Tile Restore

#140205: Gallon
#140206: Case of 4 Gallons

A restorative acidic cleaner for ceramic or porcelain tile and grout, masonry, and concrete. This is a safer alternative than phosphoric or muriatic acids. Removes grout haze, hard water deposits, soap scum, rust-spots and efflorescence. Contains no harsh fumes and is low foaming.      


Tile Restore will etch marble, limestone, and other acid sensitive materials (i.e. metals and frosted glass).

Do not overspray on surfaces not to be cleaned. If overspray occurs, rinse thoroughly.

Dilution Ratio

  Tile Restore/Water TileRestore:Water
Heavy 128 oz/Gallon 1:1
Medium 32 oz/Gallon   1:4
Light 8 oz/Gallon 1:16

Always test to determine desired results in an inconspicuous area before using. 

Remove loose debris by sweeping or vacuuming. Mix above solution well and apply to surface with a mop, sponge, or sprayer. Allow to dwell for 5 minutes, agitate with a scrub brush, and rinse and extract thoroughly. Do not allow the product to dry on the surface as this may make removal difficult. Rinse equipment after use.

For best results rinse with Tile Neutral Clean & Rinse. Reseal cleaned area with Tile Aqua or Tile Ultimate sealers.


© 2019 MasterBlend Indiana USA. All Rights Reserved.